Edwards A73501983 NXDS15IC  Corrosive Resistant Dry Scroll Vacuum Pump 100-127/200-240V 1PH 50/60HZ 

Manufacturer: Edwards Vacuum

Model: NXDS15IC

Condition: New. Ships directly from the manufacturer.

Estimated lead time: Currently out of stock. Ships in 34 weeks from acceptance of order. Please contact us for formal quote and current availability. 

Includes:

• Edwards NXDS15IC Corrosive Resistant Dry Scroll Vacuum Pump
• Power is 100-127V or 200V -240V. Please specify upon order.

Features:

• Lubricant-free within the vacuum envelope and hermetically sealed means a totally clean and dry vacuum to prevent cross contamination. 
• Advanced scroll-form and tip-seal technologies deliver best‑in-class vacuum performance and unrivalled ultimate vacuum levels.
• Unique tip seal design significantly reduces wear to minimise maintenance and extend service life. 
• Quiet operation with typical noise during operation < 52 dB(A) for minimal environmental impact. 
• Advanced interface providing a variety of traditional and analogue and digital control methods enabling remote control/monitoring via RS232 or RS485. 
• Integrated inverter drive with auto sensing input delivers optimised pumping performance globally. 
• Pump range includes 6, 10, 15 and 20 m3h-1.

Applications

• Backing turbomolecular  pumps
• Chamber evacuation
• Chemical applications including gel dryers and solvent recovery
• Electron microscopy
• High energy physics
• Mass spectrometry

Specifications

• Nominal rotational speed 1800 rpm

• Displacement m3h-1 (ft3min-1) 17.1 (10.1)
• Peak pumping speed m3h-1 (ft3min-1) 15.1 (8.9)
• Ultimate vacuum (total pressure) mbar (Torr) 0.007 (0.005)
• Minimum standby rotational speed rpm 1200
• Speed control resolution
• (percentage of full rotation speed) % 1
• Max inlet pressure for water vapour mbar 35
• Max water vapour pumping rate gh-1 240
• Maximum continuous inlet pressure mbar 200
• Voltage input V 100-127, 200-240 (+/-10%)
• Voltage frequency Hz 50/60
• Motor power 1-ph* W 300
• Power connector 1-ph: IEC EN60320 C13
• Recommended fuse 10A, 250V a.c. rms
• Weight kg (lb) 25.2 (56)
• Inlet flange NW25
• Exhaust flange NW25
• Noise level** dB(A) 52
• Vibration at inlet flange mms-1 (rms) < 4.5
• Leak tightness (static) mbar ls-1 < 1×10-6
• Operating temperature range °C (°F) +5 to +40 (+41 to +104)

* Typical. See graphs on page 6.
** For low fan speed, typical at ultimate end when load/ambient conditions allow.